22 Series DC Diaphragm Pump 12V/24V 2.0-5.0LPM 17-120PSI

12V/24V 2.0-5.0LPM 17-120PSI

The SEAFLO 22 series pumps are your best choice when looking for a high performance diaphragm pump at an economical cost. Simple but highly versatile, the Seaflo 22 series pumps are perfect for fluid handing applications such as purification, light industrial, food and beverage, agricultural, and automotive. Additionally, it's packed with features and capabilities you'll never find in other pumps at this price point. The 22-series of diaphragm pumps are self-priming, can be run dry without harm and have an internal bypass feature which reduces pump cycling. It provides up to 1.4 gallons per minute.

Specifications|
Parameters
|Manual

FEATURES & BENEFITS

1. Adjustable pressure switch from 17-120psi for OEM when needed.

2. By-pass reduces noise. Strain on the pipes and wear on the pressure switch.

3. Quite operation. Motor sounds not louder than your room fan running.

4. Hose connections with multiple fittings allow connection to any outlet.

5. Rubber feet for noise reduction for vibration.

6. Compact design and heavy-duty demand switch.

7. Can run dry.

TYPICAL APPLICATIONS

Marine, RV, Agricultural Spraying, General Industrial, Fitration, Beverage Processing, Solar Water System, etc.

PUMP
Type	2 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type	Pressure switch & By pass control
Max Recommended Temperature	60° C (140° F)
Priming Capabilities	6 feet (1.8 m) suction lift
Re-start Pressure	Shut-off Pressure 60 PSI : 48 PSI ±5 PSI (±0.3 bar) Shut-off Pressure 100PSI : 75 PSI ±5 PSI (±0.3 bar)
Inlet/Outlet Ports	3/8" (10mm) hose barb
Weight	2.4lbs (1.1kg)

MOTOR
Leads	18 AWG, 10" (25cm) long with 2-Pin connector/Leads
Duty Cycle	Intermittent
Max. Draw	5.0 A
Fuse Amps	7.5 A

PUMP
Type	2 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type	Pressure switch & By pass control
Max Recommended Temperature	60° C (140° F)
Priming Capabilities	6 feet (1.8 m) suction lift
Re-start Pressure	Shut-off Pressure 60 PSI : 48 PSI ±5 PSI (±0.3 bar) Shut-off Pressure 80 PSI : 65 PSI ±5 PSI (±0.3 bar) Shut-off Pressure 100 PSI : 75 PSI ±5 PSI (±0.3 bar)
Inlet/Outlet Ports	3/8" (10 mm) hose barb
Weight	2.4 lbs (1.1 kg)

MOTOR
Leads	18 AWG, 10" (25 cm) long with 2-Pin connector / Leads
Duty Cycle	Intermittent
Max. Draw	5.0 A
Fuse Amps	7.5 A

STANDARD PUMP CONFIGURATIONS

Model	Voltage	Open Flow （GPM/LPM）	Shut-off Pressure （PSI/BAR)	Max Amps	Control Type	Valves	Diaphragm	Ports	Wire Connections
SFDP1-012-080-22	12V	1.2/4.5	80/5.5	4.5 A	Switch & By pass	EPDM	Santoprene	3/8" Barb	2-Pin/Leads
SFDP2-012-080-22	24V	1.2/4.5	80/5.5	2.3 A	Switch & By pass	EPDM	Santoprene	3/8" Barb	2-Pin/Leads
SFDP1-013-100-22	12V	1.3/5.0	100/6.9	5.0 A	Switch & By pass	EPDM	Santoprene	3/8" Barb	2-Pin/Leads
SFDP2-013-100-22	24V	1.3/5.0	100/6.9	2.6 A	Switch & By pass	EPDM	Santoprene	3/8" Barb	2-Pin/Leads

Consult factory for other available models

OEM/ODM service: Pressure from 17 psi to 120 psi, open flow from 2.0 lpm to 5.0 lpm. Material can adjusted according to your requirement.

PERFORMANCE

1.3GPM

PRESSURE		FLOW		CURRENT
PSI	BAR	GPM	LPM	APMS
0	0	1.24	4.70	2.49
10	0.69	1.00	3.80	2.75
20	1.38	0.56	3.24	3.14
30	2.07	0.74	2.80	3.59
40	2.72	0.47	1.80	3.63
50	3.45	0.21	0.80	3.84
60	4.14	0	0	4.02

View other parameter tables / graphs, Please click here

HEAT RISE

TECHNICAL PARAMETERS

PRODUCT DETAILS

SHIPPING INFORMATION


	Unit Pump Weight	2.43 lbs (1.10 kg)
	Selling Unit Size (L x W x H)	8.15" x 4.16"x 2.91" (20.7 x 10.5 x 7.4 cm)
	Selling Unit Weight	2.64 lbs (1.20 kg)
	Master Carton Size (L x W x H)	17.36" x 13.66" x 9.84" (44.1 x 34.7 x 25.5 cm)
	Master Carton Qty	18 pcs
	Master Carton Weight	50.41 lbs (23 kg)

CAUTION

Please make sure correct wiring, otherwise it will damage the pump (The red cable should be connected with the positive pole, and the black cable should be connected to the negative pole).

Similar Products

Email Ask: